Call Today

From hauling a dish washer into your home to attaching the water links, installing a dishwashing machine can take up to 5 hrs. A plumber will have the right tools on hand as well as can mount your brand-new dish washer in under 2 hrs.

 

Not Mounting Your Dish Washer Appropriately Can Cause a Hill of Problems

Not just can mounting a dish washer correctly invalidate your service warranty, however it can also create a mess. If you improperly install your dishwasher to the trash disposal, you may observe pungent scents or have residue on your meals.

 

An Improper Installment Can Void the Dishwashing machine's Service warranty

Prior to installing a dishwashing machine on your own, you should read the guarantee meticulously. Even a little harming the dish washer throughout the installation process can void the service warranty. Since the price of a dishwashing machine varies in between $300 to $1,000 and also upwards, that can be a costly blunder. Even if the dishwashing machine still works, you will certainly not have the ability to change it must it damage soon. So, unless you are handy as well as have experience installing dishwashers, you should work with a plumber so you do not risk your service warranty.

 

Mounting a Dish Washer Calls For a Variety of Equipments

If you do not have a variety of tools on hand, you might require to make a journey to Lowe's or Residence Depot. To mount a dishwashing machine, you require the adhering to devices: pliers, an adjustable wrench, a collection of screwdrivers, a tube cutter, as well as opening saws.

 

A Plumber Can Evaluate the Supply Lines

A supply line, specifically a dishwashing machine port, attaches the dishwasher to a water source. If you acquire a new supply line, a plumber can ensure that the line is compatible with both your dish washer and also water resource. A specialist plumber can evaluate it to ensure that it's in great problem and does not have any kind of leakages if you decide to make use of an existing supply line.

 

A Plumber Can Complete the Work Affordably and also Rapidly

A plumber can install your dishwasher in one to two hours. The average plumber won't charge more than a couple of hundred bucks to mount your dishwasher.
From transporting a dish washer right into your house to attaching the water connections, mounting a dishwasher can take up to five hrs. To make your life simpler as well as to stay clear of installing a dish washer incorrectly, we recommend working with an expert plumber. A plumber will have the right devices on hand as well as can mount your new dish washer in under two hrs. Unless you are convenient as well as have experience mounting dishwashers, you need to work with a plumber so you don't risk your service warranty.
A supply line, specifically a dishwasher connector, connects the dish washer to a water source.

 

How To Install A Dishwasher

 

Installing A Dishwasher Yourself

 

Just like other home appliances, a dishwasher helps to make chores less time-consuming and free of hassle. Most modern kitchens have a dishwasher or a cabinet space for dishwasher installation built into them. An older kitchen with no dishwasher or cabinet space for one might require a little reconstruction to accommodate dishwasher installation.

 

Installing a dishwasher requires basic knowledge of plumbing and electrical wiring. This article contains the steps involved in dishwasher installation, dishwasher installation tips, things to consider when installing a dishwasher in a kitchen that previously had no dishwasher in it, and tips for maintaining a dishwasher.

 

Steps Involved In Dishwasher Installation

 

Step One: Gather the Necessary Supplies

 

Gather all the required items and keep them near the installation site for easy reach. The materials and tools you will require include the following:

 

• A screwdriver


• • A hose clamp


• • Duct tape (optional)


• • A brass fitting


• • Teflon tape


• • A pair of pliers


• • An adjustable wrench


• • A drill


• • Braided steel water line


• • A pair of rubber hand gloves (optional)


• • Wire nuts

 

Step Two: Take Safety Measures

 

First, turn off the power socket and unplug the power cord if it is a plug-in dishwasher. Then, proceed to turn off the circuit breaker. Next, turn off the hot water shut-off valve under the kitchen sink and run the tap to ensure the water supply is shut off. Protect your kitchen floor close to the installation area with an old rug or a piece of drop cloth.

 

Step Three: Remove the Old Dishwasher

 

This step only applies if your kitchen has an old dishwasher that you want to replace. Remove the cabinet door to gain complete access to the old dishwasher. Next, remove the cover of the access panel located at the bottom front side of the dishwasher. Locate the junction box inside the access panel.

 

Now, unscrew the terminal screws holding the wires in place at the junction box. Then, remove and tuck the wires out of the way with duct tape. Locate the dishwasher water inlet tube, undo the brass fitting and disconnect the water supply pipe from it. Put the disconnected end of the water supply line pipe into a bucket or bowl to collect any water remaining in it.

 

Reach down beneath the sink to undo the drain hose. Loosen, then clamp and disconnect the drain hose of the dishwasher from the tailpiece of the sink. Next, put the disconnected end of the drain hose into a bucket to collect the water and debris.

 

With all the connections out of place, remove the screws holding the dishwasher in place with a screwdriver, gently pull the dishwasher out from the cabinet and set it aside. You can use a piece of cloth or towel to clean up the mess made or any water spillage on the floor. Also, clean the cabinet where the old dishwasher was before installing a new one.

 

Skip this step if you are having a dishwasher installed for the first time in your kitchen.

 

Step Four: Install the New Dishwasher

 

Connect the Water Supply

 

Wrap Teflon tape on the tip of the water inlet pipe located at the bottom of the dishwasher. Screw on the 90 degrees brass fitting to the taped inlet pipe and tighten it with an adjustable wrench. Most dishwasher units do not include a brass fitting, but they are available at hardware stores.

 

Once you have the fitting, connect the new water supply line to the elbow of the brass fitting. Pass the other end of the waterline through one of the cabinet holes and place it on the floor beneath the kitchen sink.

 

Attach the Drain Line

 

Locate the dishwasher drain standout pipe, connect the drain line to the dishwasher, and secure the connection with a hose clamp. Pass the other end of the drain line through the cabinet hole and place it towards the sink drain tailpiece

 

Slide the Dishwasher into Place

 

Attach the adjustable legs to the front of the dishwasher. Carefully slide the dishwasher under the countertop into the cabinet. Stop halfway and ensure everything is in a good position before sliding it in completely. Finish hooking up the water line by connecting the other end to the dual shut-off valve located under the kitchen sink.

 

Proceed to connect the drain hose through an air gap to your garbage disposer, if you have any, or to the drain tailpiece of your sink. If you do not have an air gap, make a high loop with the drain hose before connecting it to the garbage disposal or the sink drain tailpiece.

https://www.movementplumbing.com/blog/how-to-install-a-dishwasher

Click